Chapter 6: Using the TV’s features
32
3無
Press
on the remote control. The previous
channel will display. Each time you press
, the
TV will switch back and forth between the last two
channels that were tuned.
Note:
If you press
from a non-antenna
input, the TV will return to the last-viewed
input.
Switching between two channels
using SurfLock™
The SurfLock™ feature temporarily “memorizes” one
channel to the
button, so you can return to that
channel quickly from any other channel by pressing
. To memorize a channel to the
button:
1無
Tune the TV to the channel you want to program
into the
button.
2無
Press and hold
for about 2 seconds until
the message “Memorized” appears on-screen.
The channel has been programmed to the
button.
3無
You can then change channels repeatedly, and
when you press
, the memorized channel
will be tuned.
The TV will return to the memorized channel one
time only. Once you press
and then change
channels again, the CH RTN memory will be cleared
and the button will function as Channel Return,
by switching back and forth between the last two
channels that are tuned.This feature also works for
external inputs.
Selecting the picture size
You can view many program formats in a variety of
picture sizes—
Natural
,
TheaterWide 1
,
TheaterWide
2
,
TheaterWide 3
,
Full
,
4:3 HD
,
Native
,
and
Dot by Dot
(available in PC Mode Only).
Note:
The “picture size” illustrations are
examples only. The format of the image (in any
of the picture sizes) will vary depending on the
format of the signal you are currently watching.
Select the picture size that displays the current
program the way that looks best to you.
You can save separate picture size preferences for
each input on your TV.
To select the picture size using the remote
control:
1無
Press
on the remote control.
2無
While the
Picture Size
screen is open, you can do
one of the following to select the desired picture
size:
•
Repeatedly press
.
•
Press the corresponding Number button (0–6)
while the
Picture Size
screen is open.
•
Press
p
or
q
while the
Picture Size
screen is
open.
To select the picture size using the menus:
1無
Select
Picture Size
in the
Theater Settings
menu.
2無
Press
t
or
u
to select the desired picture size
setting.
3無
Highlight
Done
and press
.
Note:
Some of the picture sizes may not be
available depending on the receiving signal
format (those will be “grayed out” in the
Picture
Size
screen).
Using these functions to change the picture
size (i.e., changing the height/ width ratio)
for any purpose other than your private
viewing may be prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Note:
If you select one of the TheaterWide
®
picture sizes, the top and bottom edges of the
picture (including subtitles or captions) may be
hidden. To view the hidden edges, either scroll
the picture (
TheaterWide 2
and
3
only) or try
viewing the program in
Full
or
Natural
picture
size.
Picture Size
Natural
Some program formats will display with sidebars
and/or bars at the top and bottom.
TheaterWide 1
(for 4:3 format programs)
The center of the picture remains close to its original
proportion, but the left and right edges are stretched
wider to fill the screen.
(continued)
Summary of Contents for 32DT1U
Page 57: ...Notes ...
