Toshiba 24PB1E, Owner'S Manual

Page: 19 / 32

19
Using the TV’s features
Adjusting the sound quality
1
From the SOUND menu, press s or r to
select an item you want to adjust.
2
Press v or w to adjust the settings as
required.
Selection v Pressing w
Bass weaker stronger
Treble weaker stronger
Balance decreases the
right channel
decreases the
left channel
Using the Advanced Sound Settings
Bass Boost helps to create rich bass.
Voice Enhancement helps to emphasize
dialogue. It will be easier to hear voices over
other background audio.
1
From the
SOUND
menu, press s or r to
select
Advanced Sound Settings
, and then
press Q .
2
Press s or r to select the item you want to
adjust.
Advanced Sound Settings
Bass Boost
Voice Enhancement On
Off
Voice Enhancement : To turn the vocal
emphasis effect On
or Off .
Bass Boost : To select the desired
bass expansion level
On or Off .
Using the Stable Sound
The
Stable Sound
function limits the highest
volume level to prevent extreme changes in
volume when the signal source changes (for
example, to prevent the sudden increase
in volume that often happens when a TV
programme switches to a commercial).
1
From the SOUND menu, press s or r to
select Stable Sound .
2
Press v or w to select On or Off .
Note:
The Stable Sound effect is active only when the
sound outputs from the speaker.
Selecting the stereo programmes
1
When a stereo programme is received,
d
Stereo appears.
10
ABCD
Stereo
2
Press g to select the stereo/monaural
mode.
d
Stereo
and
e
Mono
appear
cyclically on the screen.
Stereo
Selecting the bilingual programmes
1
When a bilingual programme is received,
j
Dual appears.
2
Press g to select the sound to be
heard. The sound differs according to the
transmission system: NICAM or German
stereo/bilingual broadcast.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j
Dual 1 Sub I sound Main sound
J
Dual 2
Sub
II
sound Sub sound
e
Mono
Main sound —
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence
arises in the low sound volume level, setting the
e
Mono 2 mode will mitigate the problem.
1
When a monaural programme is received,
e
Mono appears.
2
Press g to select a monaural mode that
is easy to hear.
e
Mono 1 and
e
Mono 2
appear cyclically to the screen.
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching
on the
e
Mono 2 mode.