Toshiba 19C100UM Owner'S Manual Download Page 42

Page: 42 / 88

Chapter 6: Using the TV’s features

Using the Dolby

Digital Dynamic

Range Control feature

This dynamic range control feature causes the

ATSC dynamic range to be further compressed,

allowing you to switch from ATSC to analog

broadcasts at the same dynamic range.

Note:

•

This item will be grayed out for NTSC

signals, Video, ColorStream, and PC inputs.

•

The Dolby Digital Dynamic Range Control

will function in relation to Optical Output

Format (PCM mode).

Using the Locks menu

The Locks menu includes the Enable Rating

Blocking, Edit Rating Limits, Input Lock, Control

Panel Lock, GameTimer and New PIN Code

features. You can use these features after entering

the correct PIN code.

Entering the PIN code

If the wrong PIN code is entered, the message

“Incorrect PIN code, please try again!” appears.

Highlight

Retry

and then press

. Enter the code

again and then press

When the correct PIN code is entered, the

Locks

menu opens.

If you cannot remember your PIN

code

While the PIN code entering screen is displayed,
press

four times within five seconds. The PIN

code will be cleared and you can enter a new PIN

code.

Changing your PIN code

From the

Sound

menu, press or to

select

Audio Setup

and then press

Press

select

Dolby Digital

Dynamic Range Control

and then press

or to select

Compressed

. When

Standard

is selected, the audio is output with

minimal compression.

To save the new settings, highlight

Done

and

then press

To revert to the factory defaults, highlight

Reset

and then press

Press

and then press or to highlight

Locks

Press , which displays the PIN code entry

screen.

•

The

Lock System

screen appears if a PIN

code has not been stored. Press the Channel

Number buttons to enter a new four-digit

code, enter the code a second time to confirm,

and then press

•

The

Locks/Active

screen appears if the PIN

code is already stored. Use the Channel

Number buttons to enter your four-digit code

and then press

From the

Locks

menu, press to display the

PIN code entering screen.

Enter your four-digit PIN code and then press

Press

select

New PIN Code

and

then press

Press the Channel Number buttons to enter a

new four-digit code. Reenter the PIN code to

confirm it.

Press

. The new PIN code is now active.

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for 19C100UM

























































































Search results

Summary of Contents for 19C100UM

Reviews:

Related manuals for 19C100UM

Brands by name

Popular brands

Toshiba 19C100UM, Owner'S Manual

Search results

Summary of Contents for 19C100UM

Reviews:

Related manuals for 19C100UM

Brands by name

Popular brands