Toshiba 19C100UM Owner'S Manual Download Page 21

Page: 21 / 88

Chapter 2: Connecting your TV

REGZA-LINK

connection

You can control the basic functions of connected audio/video devices using the TV’s remote control if you
connect a REGZA-LINK

compatible audio receiver or playback device. For an explanation of setup and

operations, see Page 47-49.

To connect an audio receiver and playback

devices, you will need:

•

HDMI cables (

Page 17)

Note:

•

If several devices are connected, REGZA-

LINK

feature may not operate properly.

•

For proper operation, it is recommended

that you use HDMI cables with the HDMI

Logo (

Before controlling the device(s):

•

After completing the above connections, set the

REGZA-LINK Setup

menu as you desire (

Page 49).

•

The connected devices must also be set. For

details, see the operation manual for each device.

•

The REGZA-LINK

feature uses the CEC

technology as regulated by the HDMI standard.

•

This feature is limited to models incorporating

Toshiba’s REGZA-LINK

. However, Toshiba is

not liable for those operations. Refer to the

individual instruction manuals for compatibility

information.

Note:

This feature may not work properly

depending on the devices that are connected.

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for 19C100UM

























































































Search results

Summary of Contents for 19C100UM

Reviews:

Related manuals for 19C100UM

Brands by name

Popular brands

Toshiba 19C100UM, Owner'S Manual

Search results

Summary of Contents for 19C100UM

Reviews:

Related manuals for 19C100UM

Brands by name

Popular brands