English
- 8 -
Connections and controls
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the
top of the television may be used for some functions.
Switching on
If the standby LED is unlit, connect the mains plug to
the mains outlet. Press the Power button to switch the
television into standby. The blue LED will light.
To view the television, press
or any of the number
buttons on the remote control, or the
P+
/
P-
buttons on
the TV. The blue LED will turn off and the picture will
appear after a few seconds.
To put the television into standby, press
on the
remote control, the blue LED will light.
Using the remote control
Press the
MENU
button on the remote control to see the
menus.
In
TV
mode the menu appears as a group of icons each
for a menu option. Press the
Up
or
Down
button to
select a topic.
To use the options press the
Right
or
OK
buttons on the
remote control to select. Use
Up
or
Down
buttons to
select the required choice. Follow the on screen instruc-
tions. The functions of each menu are described in
detail throughout the manual.
Using the controls and connections
Using the control buttons on the top of the TV:
• To alter the volume press
.
• To alter the programme position press
on the top
of the TV.
• Press
MENU
and
and
to control the
menu options.
• Press
MENU
to finish.
When connecting mono sound equipment to
EXT2 (BACK-
AV)
, connect the audio output of the equipment to the L or
R socket on the television, then press
to select
Dual I for the left mono, Dual II for the right mono, or
stereo for mono through both left and right speakers.
To select the Input, press
until
EXT2
is highlighted in
SOURCE
menu as described on
page 15
.
The television
will automatically sense the type of signal.
Please always refer to the owner’s manual of the equipment
to be connected for full details.
LED
Blue = Standby
TV/AV
MENU
POWER
ON/OFF
PROGRAMME
UP / DOWN
VOLUME
UP / DOWN
HEADPHONE
JACK
TV/AV
MENU
P/CH
VOLUME
