English
- 7 -
Connecting external equipment continued,
Aerial cables:
Connect the aerial to the socket on the rear of the televi-
sion. If you use a decoder and/or a media recorder it is
essential that the aerial cable is connected through the
decoder and/or through the media recorder to the televi-
sion.
SCART leads:
Connect the media recorder
IN/OUT
socket to the televi-
sion. Connect the decoder
TV
socket to the television.
Connect the media recorder
SAT
socket to the decoder
MEDIA RECORDER
socket.
Before running
APS (AUTO PROGRAMMING SYSTEM)
put
your decoder and media recorder to
Standby.
A wide variety of external equipment can be connected to
the back of the television, therefore the relevant owners
manuals for
all
additional equipment
must
be referred to.
If connecting S-VIDEO equipment, set the
INPUT
for
S-VIDEO.
See
page 15
.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
to select between
TV, EXT1,
EXT2, S-Video or PC RGB.
Connecting the PC via PC input
• Power off both computer and TV before making any con-
nections.
• Connect the PC cable to the PC input of your TV and to the
15-pin connector on the rear of your computer.
• Tighten the screws on the plugs until the connectors are
fastened securely.
• For PC sound, use stereo jack socket located at the rear
side of the TV.
