Instructions handbook
25
13.0 - Installation and working environment.
Before starting to install the machine, the operator should make sure that all the equipment needed
for installation is available.
The machine must be installed correctly in order to ensure correct operation.
Stability: the machine mounted on castors might be moved accidentally, care must be given to
prevent accidental movements; place the machine on floors with max. slope of 10% and once
installed brake the castors.
The machine and its electrical equipment have been designed and manufactured for installation in
an industrial environment and for use only in closed places where they cannot be subjected to the
weather.
Figure 17 - operating environment conditions
1) The machine must be placed in environments not directly exposed to the weather.
2) Different temperatures may be allowed for short lengths of time and in any case not in operating conditions.
3) Different humidity rates may be allowed for short lengths of time and in any case not in operating conditions.
4) Different temperatures may be allowed only replacing certain parts of the machine.
Unless otherwise specified contractually, the machine may only operate in the environmental
conditions of the following paragraphs and those mentioned above. Environmental conditions other
than those specified may cause operating faults or breakage, resulting in dangerous situations for
the operator and persons exposed.
ENVIRONMENT:
Closed (1)
ENVIRONMENT TEMPERATURE:
PRODUCT TEMPERATURE:
MAXIMUM ALTITUDE:
MAXIMUM OUTSIDE HUMIDITY
From + 10° C to + 40° C (2)
From + 5° C to + 60° C (4)
1,000 metres above sea level
50% R.H. at 40° C (3)
