Instructions handbook
13
9.0 – Machine disassembly and assembly
WARNING:
Never start disassembly operations for any reason whatsoever before the machine has stopped
completely and the hot parts have cooled down. Make sure that the machine is not powered,
(remove the fuses or press the emergency button). Place special notices to indicate that repair and/or
maintenance work is in progress.
WARNING:
For all other maintenance operations not mentioned in this handbook, it is indispensable to contact
an authorised TEM workshop.
DISMANTLING PUMP BODY
•
Loose the screws (1) on the pump body
•
Clean the impeller (2) and the inner part of the pump body (3).
•
Put inside the pump body and fix the screws.
Figure 5 – Dismantling the pump: centrifugal electro-pump
