Instructions handbook
11
8.0 - Machine introduction and description
8.1 – Use and description
Filling machine B have been realized to suite the needs of small producers; the machine is suitable
for filling of glass bottles with wine, oil, cosmetics, milk, bear and fruit juices. Main parts of the
filling machine are:
-
tank (A) with main frame in AISI 304 STAINLESS STEEL,
-
series of filling nozzles (B) to facilitate insertion and ejection of the bottles,
-
self-priming pump (D), Coaxial pump with natural, non toxic rubber impeller, Neoprene,
Nitril, EPDM or silicon; both types of pump can be supplied with By-Pass,
-
electric floater (E) (OPTIONAL) or mechanical floater (C) (OPTIONAL),
-
cartridge (F) for microfiltration (OPTIONAL).
-
saturator (G) for addition of gas in the product (OPTIONAL).
1.
Cover
2.
Inlet pipe
3.
Vat discharge valve
4.
Drops recovery vat
5.
Tank level
6.
Total tank discharge valve.
7.
Bottle to fill
8.
Holes for regulation of vat
height
9.
Filler inlet valve
10.
Panel control (available on
models with electric floater).
Figure 4 – Linear filler description
