Torus Power WM 40 BAL AVR-2 ELITE, Owner'S Manual

Page: 9 / 38

6 | P a g e
Voltage Fault Protection
If the AC voltage supplied to the AVR ELITE is too high or too low voltage (see reference chart at the end
of this section) for 1 second or more, a voltage fault message is displayed and the back panel fault
output is turned on. The unit automatically goes into shut down mode so the voltage to each power
output is automatically turned off even while the mains power to the unit remains in the ON position.
The front panel display will alternate to show either of the following message pairs:
OR
When the AC supply voltage has returned to a normal operating range for 1 minute consecutively the
AVR ELITE will resume normal operation and the High or Low AC Voltage advisory message will no longer
appear on the LCD display. The output zones will provide power again and be turned on in sequential
order with the delay between zones as defined in System Setup.
Nominal
Input
Output Fully
Regulated
Output
Range
Auto
Shutdown
Low Input
Voltage
Auto
Shutdown
High
Input
Voltage
Output
Range
Before
Auto
Shutdown
Fully
Regulated
Input
Range
Auto
Turn
On
Low
Input
Value
Auto
Turn
On
High
Input
Value
North American
120 120
+/- 4V
116-124 <85 >135 110-130 90-130 90 130
240 120
+/- 4V
116-124 <170 >270 110-130 180-260 180 260
International
220 220
+/- 8V
212-228 <150 >250 200-240 160-240 160 240
230 230
+/- 8V
222-238 <160 >260 210-250 170-250 170 250
240 240
+/- 8V
232-248 <170 >270 220-260 180-260 180 260