Torus Power WM 40 BAL AVR-2 ELITE, Owner'S Manual

Page: 12 / 38

9 | P a g e
The Zones on the AVR ELITE switch on in sequence: Zone A first, Zone B second and so on. This will
allow you to select the order in which your components are switched on. For example, components
that should be switched on first (such as front end components) can be connected to Zone A and Zone
B. Components to be switched on last (such as power amplifiers) can be connected to Zones C, D (or
Zones E, F, G in higher capacity units). All output zones will be turned to the ON state when the AVR
ELITE is turned ON. This also applies when output zone(s) were OFF prior to cycling its main power by
turning it OFF and then ON again.
Routers should be connected to Zone R if the automatic reboot feature is to be utilized; if this feature is
NOT to be used, Zone R can be used as an extra controllable output zone. Zone R switches on last. Since
every output on the AVR ELITE is capable of providing full current with no restriction, connecting
components for preferred sequencing will NOT compromise performance.