Torus Power WM 40 BAL AVR-2 ELITE, Owner'S Manual

Page: 6 / 38

3 | P a g e
Shipping Carton & Packing Material
Please keep the original crate and all packing material. This will ensure the unit is protected in future
transport.
In the unlikely event you have a problem and must return it for service you must use the original packing
material.
Ship the unit only in the original packing material, as the unit is not insurable by carriers otherwise.
Placement & Ventilation
Torus Power PIUs (Power Isolation Units) are extremely efficient yet very high power devices, and must be
adequately cooled.
The Wall Mount cabinets have ventilation slots on each side. Maintain at least 1” of free space from
each of these areas. Should your installation conditions be confined, additional forced air-cooling
may be necessary.
Do not install the unit directly above heat generating equipment.
There are 4 pre-punched knockouts along the bottom of the cabinet to accommodate the incoming power
source wiring and the output circuit wiring.
Warranty
Torus Power Inc. products are warranted to be free from manufacturing defects as follows;
• Five years from the original date of sale for toroidal transformers
• Two years from the original date of sale for all other components
The product warranty includes parts, labour and return shipping to the customer. Shipping to Torus
Power Inc. for warranty repair is the responsibility of the customer.
Warranty coverage is not transferrable and original proof of purchase is required for warranty claims. In the
event of a warranty claim, Torus Power Inc. will remedy the issue by repair or replacement, as we deem
necessary, to restore the product to full performance.
This warranty is considered void if the failure of the product or any component part is caused by damage or
misuse. Failure to fully comply with Torus Power Inc. operating instructions voids the warranty.