Page 39
1
2
3
4
5
6
STEP
34
NOTE: Refer to TQLP Assembly instructions
for assembly of the TQLP LEG PRESS.
MAINTENANCE
Guide Rods
- Clean and lubricate with a sili-
con or Teflon based Lubricant.
Nuts and Bolts
- Tighten and/or adjust as
needed.
Cables
- check tension, end fittings, and coat-
ing. Replace if damaged or worn. Check
locking nuts at cable ends. (Note: New cables
always stretch during use. Refer to step 30 for
adjusting tension.)
Pull pins
- Check that pins fully engage when
released. Tighten pull pin nuts as needed.
Frame
- Wipe down and dry. Polish and wax.
Upholstery
- Wipe down and dry after use.
Clean and condition periodically.
Grips
- Inspect and replace if they appear worn
or damaged.
Summary of Contents for TQ5-001
Page 40: ...Page 40 ...
Page 42: ...Page 42 ...