Operation
7.2 Travel mode
7.2.1 Starting a trip
ADVICE
■
If there is visible damage to components or cables, do not turn on the
Ultralight system.
■
Ensure that all people on board wear a life jacket.
■
Before starting, attach the lanyard of the Emergency Stop to your wrist or life
jacket.
■
The state of charge of the battery must be checked at intervals while on the
move.
ADVICE
During breaks in a trip, if there are swimmers near the boat while at anchor: Re-
move the magnetic kill switch, in order to prevent unintentional operation of the
Ultralight system.
Starting the motor
1.
1
Fig. 73:
On/Off button
2.
Fig. 74:
Accelerator lever
1. Switch the motor on by pressing the On/Off button (1) for one second.
2. Place the magnetic kill switch on the accelerator lever.
3. Move the accelerator lever from the neutral position to the desired position.
7.2.2 Forward/reverse motion
Fig. 75:
Accelerator lever
1. Operate the electronic accelerator lever accordingly.
Forward
Reverse
Tilt support for reverse
ADVICE
Make sure that the motor is vertical to the water level to prevent tilting of the
motor unit.
1. Fix the motor with the tilt support for reversing, see
2. Ensure that the motor unit is vertical to the water surface and is not tilted.
If that is not the case, push the kayak/boat forwards and repeat the first step.
page 103 / 128
