Start-up
Preparation of the swivel cords/control cords and cord for reverse fixing
5
4
Fig. 61:
Clamp
4
Clamp
5
Screws with counter-plate
1. Fix the clamp (4) using screws and counter-plates (5) in the rail on the starboard
side of the kayak.
2. Cut the cord provided into sections of the appropriate length.
Make sure than the cords reach from the bracket to the clamp position.
3. Melt the ends of the cords.
6
7
Fig. 62:
Cord with carabiner
6
Cord
7
Carabiner
4. Attach a carabiner (7) to each end of the cords (6).
ADVICE
Make sure that the knot is tight and cannot come loose.
page 92 / 128
