Start-up
This helps to:
■
Reduce safety risks when interconnecting batteries.
■
Counteract negative effects on the entire battery system (loss of capacity, so-
called "drift") caused by interconnection, or capacity changes which arise over
time between batteries.
■
Reduce losses at the contact points.
ADVICE
When charging batteries, ensure that galvanically separated charger units are
always used. We recommend providing one charger unit for each battery. Your
specialist dealer will certainly be able to assist you in your selection. During
charging, put the main switch in the cable set to the "OFF" position. This helps to
prevent potential electrolytic corrosion.
ADVICE
As soon as a battery fails, it is recommended also to replace the other batteries.
5.5.2 Connection of Cruise 10.0 T to two Torqeedo Power 48 5000
batteries
3
3
10
11
3
3
2
2
12
6
7
8
9
1
7
5
4
4
Fig. 42:
Wiring diagram for Power 48 5000
The Cruise 10.0 T provides high power at low voltage. High currents therefore flow
during operation. Therefore connect the Cruise 10.0 T with both Power 48 5000s as
shown in
"Fig. 42: Wiring diagram for Power 48 5000"
.
page 85 / 121
