Product Overview
Figure 4
1.
Z Stand
©
6.
Fuel cap (both sides)
2.
Height-of-cut lever
7.
Parking brake lever
3.
Motion control lever
8.
Mower deck
4.
Seat belt
9.
Caster wheel
5.
Roll bar
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 4 and Figure 5).
Figure 5
1.
Hour meter
6.
Glow plug light
2.
Ignition switch
7.
Engine Temperature light
3.
Fuel selector valve
8.
Throttle control
4.
Audible alarm
9.
PTO Switch
5.
Glow plug switch
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 5).
Safety Interlock Indicators
There are symbols on the hour meter and they indicate
with a black triangle that the interlock component is in
the correct position (Figure 6).
Battery Indicator Light
When the ignition key is initially turned to the
Run
position for a few seconds, the battery voltage will be
displayed in the area where the hours are normally
displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 6).
Figure 6
1.
Safety interlock symbols
3.
Battery light
2.
Hour meter
Throttle Control
The throttle control is variable between
Fast
and
Slow
.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage the
electric clutch to drive the mower blades with the motion
control levers in the center, un-locked position. Pull the
switch up to engage the blades and release. To disengage
the blades, push the blade control switch (PTO) down.
Neutral Lock Position
The neutral lock position is used with the safety interlock
system and to determine neutral position.
15
Summary of Contents for Z580-D Z Master 74266
Page 65: ...Schematics g012068 Wire Diagram Rev A 65 ...
Page 66: ...Notes 66 ...
