Toro Z 440 Pro Value Series, Service Manual

Page: 99 / 190

5-12 Z Master Z400 Service Manual
5
ENGINE
Kohler V-Twin 20 hp Engine Removal
1. Remove the battery negative cable from the battery.
2. Raise the rear wheels of the machine off the ground
and support frame with jack stands. Remove both
rear wheels.
Fig 251 PICT-0267
4. Remove the 4 bolts and nuts that hold the tailpipe
guard to the right hand guard strap (Fig. 251).
19. Connect the battery negative cable.
Fig 249 PICT-0036c
c. Pull the cable housing until the throttle linkage
is in the full throttle position. Tighten the cable
clamp (Fig. 249).
3. Remove the eight bolts, washers and nuts that hold
the notched weight onto the rear of the machine.
Remove the notched weight from the rear of the
machine (Fig. 250).
Fig 250 PICT-0265