Toro Z 440 Pro Value Series, Service Manual

Page: 24 / 190

2-15 Z Master Z400 Service Manual
2
SPECIFICATIONS
Fig 030 PICT-0046
Model and Serial Number
Location
The unit model and serial number plate is located on the right hand side of the unit,
below the right side motion control lever (Fig. 000).
Engine Model and Serial Number
Identification:
Consult the appropriate engine manufacture’s service literature for the
location and translation of the engine model and serial number information.
Hydrostatic Pumps Model and Serial
Number:
The label (Fig. 000), can be located on the pump housing. It identifies the
model and configuration of the BDP pump.
Available Service Manuals / Service Aids
Hydrostatic Pumps: Hydro-Gear BDP-10A/16A/21L – Service and Repair Manual
Form # 492-4789
Wheel Motors: Parker/Ross Wheel Motor Service Manual
Form # 492-4753
Hydraulic Troubleshooting: Interactive hydraulic troubleshooting and failure analysis on compact disk
Form #492-4777
Electrical Troubleshooting: Interactive electrical troubleshooting and wiring diagrams on compact disk
Form #492-9143
Fig 031 configuration
Hydraulic System Oil Capacity: 2.1 quarts (2.0 liters)
Fluid Type: Mobil 1 Extended Performance 15W-50 Synthetic
Fluid Level: Check the fluid level while the fluid is warm. The fluid should be between cold
and hot.
Note: The fluid level should be to the top of the hot level of the baffle,
when the fluid is hot (Fig. 000 above).