Toro Z 440 Pro Value Series, Service Manual

Page: 21 / 190

2-12 Z Master Z400 Service Manual
2
SPECIFICATIONS
Cutting Decks cont.
48” (121.9cm)
&
52” (132.1cm)
7-Gauge Deck
44” (111.8cm)
SFS Deck
48” (121.9cm)
TF Deck
52” (132.1cm)
TF Deck
112cm (44”)
SFS Deck
132cm (52”)
TF Deck
Deck
Suspension
Deck
suspended
from machine
by four lift
chains, and
attached to
front cross
member by flat
strut arms and
cross brace.
The deck is
pulled along
the ground.
Belt Covers Plastic HDPE
deck covers.
Attached with
swell latches.
14-gauge,
formed steel
covers with
access holes
to allow
greasing of
outer spindles
without
removal.
Attached with
draw latches.
14-gauge,
formed steel
covers with
access holes
to allow
greasing of
outer spindles
without
removal.
Attached with
draw latches.
Plastic HDPE
deck covers.
Attached with
swell latches.
Gage Wheels Three
adjustable
gage wheels
to reduce
scalping on
the front of
deck (one on
the left-hand
side and two
in the center).
Wheels
have four
adjustment
positions.
Deck suspended from machine by four lift chains, and attached to rear
wheel supports by two struts. The deck is pulled along the ground.
Plastic HDPE deck covers.
Attached with swell latches.
Three adjustable gage wheels to reduce scalping: three on front of deck (one
on left-hand side and two in center). Wheels have four adjustment positions.
Rear gage wheels are optional.