•
If the material is broadcast too heavy at the
left side of the machine, push the diffuser
control down slightly; refer to 3 of
.
•
If the material is broadcast too heavy at the
right side of the machine, pull the diffuser
control up slightly; refer to 4 of
3.
Lock the spreader-pattern control by turning the
handle clockwise 90°; refer to 5 of
Using the Deflector Gate
Use the deflector control to temporarily stop or deflect
granular material away from sidewalks, parking lots,
patios, or anywhere the granular chemicals are not
desired.
Note:
The deflector gate changes the discharged of
materials from the left side of the spreader only.
g312556
Figure 28
1.
Fence
3.
Deflector gate lowered
2.
Flowers
•
Pull the deflector-control handle to broadcast
granular product from the left side of the impeller.
g312555
Figure 29
1.
Deflector-control handle
3.
Push (block left side
product broadcast)
2.
Pull (broadcast at the left
and right sides)
•
Push the handle to temporarily block granular
product from broadcasting at the left side of the
impeller.
Spreading Granular Material
1.
Start the engine, and adjust the throttle midway
between the S
LOW
and the F
AST
positions.
2.
Rotate the knob of the impeller-speed control to
run the impeller motor (
).
g317353
Figure 30
1.
Impeller-speed control
3.
Diffuser control
2.
Deflector control
4.
Hopper-door control
3.
Move the throttle to the F
AST
position, and drive
the machine forward.
4.
Open the hopper-door control to begin spreading
the granular material (
33
Summary of Contents for Spray Master
