Toro Sand Pro 5020, Service Manual

Page: 40 / 170

Sand Pro 2020/3020/5020
Page 3 – 20
Engine
Fuel Tank (SP 5020)
Figure 34
1. Fuel tank
2. Fuel cap
3. Steering boot
4. Boot retainer
5. R–clamp
6. Self tapping screw
7. Fuel hose
8. Hose clamp
9. Fuel filter
10. Fuel hose
11. Hose clamp
12. R–clamp
13. Fuel hose
14. Fuel shutoff valve
15. Whiz cap screw
16. Cap screw
17. Flat washer
18. Grommet
1
2
3
4 8 9 8
8 14 11 12 13
18
17
16
11
10
5
6
5
15
6
7
7
Fuel Tank Removal (Fig. 34)
1. Park machine on a level surface, lower attachment,
stop the engine, engage parking brake, and remove the
key from the ignition switch.
DANGER
Gasoline is flammable. Use caution when storing
or handling it. Do not drain fuel tank while the en-
gine is running, or when the machine is in an en-
closed area. Vapors may build up and be ignited
by a spark or flame source many feet away. DO
NOT SMOKE while draining the fuel tank to pre-
vent the possibility of an explosion. Always drain
fuel tank outside. Wipe up any spilled gasoline.
Store gasoline in a clean, safety–approved con-
tainer, and secure cap on the container. Keep
gasoline in a cool, well ventilated place and nev-
er in an enclosed area such as a hot storage
shed. Since many children like the smell of gas,
keep it out of their reach because the fumes are
explosive and dangerous to inhale.
Figure 35
1. Roll pin
2. Steering wheel
3. Upper steering shaft
1
2
3
2. Remove roll pin from the steering wheel and upper
steering shaft with a drift punch. Remove steering wheel
from the upper steering shaft (Fig. 35).