Toro Reelmaster 3555, Operator'S Manual, Page: 25 / 76

Specifications
Note:
Specifications and design are subject to change without notice.
Dimensions Reelmaster 3550 Reelmaster 3555 Reelmaster 3575
Width of Cut 208 cm (82 inches) 254 cm (100 inches) 254 cm (100 inches)
Overall Width 239 cm (94 inches) 284 cm (112 inches) 284 cm (112 inches)
Transport Width 231 cm (91 inches) 231 cm (91 inches) 231 cm (91 inches)
Overall Length 295 cm (110 inches) 267 cm (105 inches) 267 cm (105 inches)
Height to top of ROPS 188 cm (74 inches) 201 cm (79 inches) 206 cm (81 inches)
Wheelbase 151 cm (59.5 inches) 152 cm (60 inches) 152 cm (60 inches)
Weight (configured) 900 kg (1,985 lb) 1034 kg (2,280 lb) 1157 kg (2,550 lb)
Weight (no cutting units) 708 kg (1,560 lb) 751 kg (1,655 lb) 796 kg (1,755 lb)
Attachments/Accessories
A selection of Toro approved attachments and accessories is available for use with the machine to enhance
and expand its capabilities. Contact your Authorized Service Dealer or authorized Toro distributor or go to
www.Toro.com for a list of all approved attachments and accessories.
To ensure optimum performance and continued safety certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty.
Operation
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Before you leave the operator’s position, do the
following:
– Park the machine on a level surface.
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
engine quickly.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Before mowing, always inspect the machine to
ensure that the cutting units are in good working
condition.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Fuel Safety
•
Use extreme care in handling fuel. It is flammable
and its vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or fill the fuel tank
while the engine is running or hot.
•
Do not add or drain fuel in an enclosed space.
•
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or other appliance.
•
If you spill fuel, do not attempt to start the engine;
avoid creating any source of ignition until the fuel
vapors have dissipated.
25