Toro Wireless Module (TWM) RF2CAN (Models 44552, 44552TE,
and 44553)
g278908
Figure 20
1.
Control tower
3.
Antenna
2.
RF2CAN module
The RF2CAN module is a solid state electrical device used to convert radio
frequency signals to and from the wireless handheld remote to CAN signals to
and from the TEC. The RF2CAN module is only active when the key switch
is in the R
UN
or S
TART
position. The RF2CAN module is mounted inside the
machine control tower.
Note:
Machine operation will only be controlled by a remote transmitter that
is recognized by (associated to) the RF2CAN module; refer to the machine
Operator’s Manual
for additional information.
Because of the solid state circuitry built into the control module, there is no
reliable method to test it. The module may be damaged if an attempt is made to
test it with an electrical test device (e.g., digital multimeter).
IMPORTANT
Before performing any welding on the machine, disconnect the
battery ground cable, wire harness ground, and engine harness
ground at the base of the engine. This will prevent damage to the
electrical system of your Pro Force Debris Blower.
Pro Force® Debris Blower
Page 5–15
Electrical System: Testing the Electrical Components
18237SL Rev A
Summary of Contents for Pro Force 44552
