Engine Settings
This screen allows you to adjust the engine speed
at the
Maximum, Efficient,
and
Low
set points for
both transport (clutch disengaged) and mow (clutch
engaged) modes in 50 rpm increments.
g030227
Figure 32
1.
Engine Settings
2.
Adjust Engine Speeds
Pressing the up arrow increases the engine speed
while pressing the down arrow decreases the engine
speed. Pressing the Enter button confirms the
speed and automatically moves you to the next
screen/engine speed set point.
g030228
Figure 33
1.
Engine Settings
4.
Up arrow—Increase
2.
Set Low Mow Speed
5.
Enter
3.
Engine speed in rpm (e.g.,
3,600 rpm)
6.
Down arrow—Decrease
The system does not allow the following to occur:
•
The efficient speed cannot be set higher than the
maximum speed.
•
The low speed cannot be set higher than the
efficient speed.
Note:
You can set the maximum speed equal to the
efficient mow speed to use the efficient mode while
mowing.
Calibrate Engine Settings
This screen allows the calibration of the actual engine
speed to match the commanded engine speed.
The enter button blacks out if the blades are not
disengaged, the parking brake is not engaged, and
the motion-control levers are not in the N
EUTRAL
-L
OCK
position. Once they are, press the Enter button to
start the calibration process.
g030234
Figure 34
1.
Calibrate Engine Settings
2.
Start Calibration
An animated hourglass appears indicating the
calibration is in process.
g030235
Figure 35
1.
Calibrate Engine Speed
3.
Processing
2.
Calibrating
Once the calibration is complete, you can toggle back
to the primary Calibrate Engine Speed screen.
g030237
Figure 36
1.
Calibration Engine Speed
3.
Toggle between screens
2.
Calibration Complete
12
