Pressing the reset button brings up a screen asking to
select a reset option.
Every time you reset the hydraulic transmission oil
service reminder, the module prompts you to select
whether the machine was serviced with Toro Premium
Hydraulic Oil. Pressing Y (yes) or N (no) determines
the correct maintenance schedule.
Engine Oil
After performing the necessary maintenance, this
screen allows you to reset the number of hours until
the engine oil service is due.
g030245
Figure 28
1.
Engine Oil
3.
Remaining hours until
service
2.
Reminder display
4.
Reset
Pressing the reset button brings up a screen asking to
confirm the reset reminder.
Historical Error
This screen displays errors that are no longer active.
The log keeps a running count of the number of times
the error has occurred during the life of the machine
and the engine hour at which the last occurred. The
log displays the errors starting with the most recent
occurrence.
g030224
Figure 29
1.
Historical Error
3.
Number of times the error
occurred during life of
machine (e.g., 3X)
2.
Current error (e.g. Low Oil
Pressure)
4.
Engine hour at which the
error last occurred
Alarms
The alarms screen allows you to activate and
deactivate the audible alarm for individual errors.
Press the Enter button to access individual error alarm
settings.
Note:
Not all audible alarms can be deactivated.
g030225
Figure 30
1.
Alarms
3.
Audible Alerts
2.
Activate/Deactivate
4.
Enter
The highlighted error name indicates that the audible
alarm is active. Pressing enter modifies the status of
the audible alarm to On or Off.
g038366
Figure 31
1.
Alarms
4.
Toggle
2.
Clutch Overcurrent
5.
Enter
3.
Fuel Low
You can deactivate the audible warning for the
following errors:
•
Service Air Filter
•
Service Engine Oil
•
Service Transmission Oil
•
Trans Over Temp
•
Fuel Low
•
Clutch Overcurrent
•
Clutch Reset Required
•
Engine Error Codes
•
System Overvoltage>16VDC
•
System Undervoltage<9VDC
•
System Voltage Low
•
Anti-Stall
11
