Toro 68021HD, Operator'S Manual

Page: 22 / 44

G019747
Figure 28
Note:
If the choke lever is set to the C
LOSED
position to
start the engine, gradually move the choke lever back toward
the O
PEN
position as the engine warms up. If the engine stalls
or hesitates, move the choke lever back toward the C
LOSED
position until the engine runs smooth. Allow the engine to
warm up, then move the choke lever to the O
PEN
position.
Shutting Off the Engine
Important:
During normal operation, if the engine
has been working hard or is hot, let it idle for a minute
before shutting off the engine. This helps to cool the
engine before stopping.
1. Ensure that the choke lever is in the O
FF
position
( Figure 27 ).
2. Move the throttle lever to the M
IN
position ( Figure 27 ).
3. Rotate the engine switch to the O
FF
position.
Controlling the Paddles
DANGER
This machine is capable of amputating hands.
• Stay in the operator’s position while the machine
is running.
• Keep all bystanders a safe distance from the
machine.
• Stop the machine immediately if any people or
animals enter the work area.
• Never place any part of your body into a position
that causes an unsafe operating condition.
Important:
Ensure that the paddles do not turn when
clutch is in the O
FF
position.
Use the clutch lever to control the power transmission to the
paddles of the machine.
G019873
1
2
Figure 29
1. Off position 2. On position
22