Settings
Menu Item
Description
Units
Controls the units used on the
InfoCenter (English or Metric)
Language
Controls the language used
on the InfoCenter*
LCD Backlight
Controls the brightness of the
LCD display
LCD Contrast
Controls the contrast of the
LCD display
Protected Menus
Allows a person authorized
by your company with the
PIN code to access protected
menus.
Protect Settings
Allows the ability to change
the settings in the protected
settings
Auto Idle
Controls the amount of time
allowed before idling the
engine when the machine is
not in use
Mow Speed
Controls the maximum speed
while in mow (low range)
Trans. Speed
Controls the maximum speed
while in transport (high range)
Smart Power
Turns Smart Power on and off
Counterbalance
Controls the amount of
counterbalance applied by the
cutting units
Turnaround
Turns Turnaround on and off
*Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced.”
Titles are in the selected language, but menu items
are in English.
Protected under Protected Menus—accessible only
by entering PIN
About
Menu Item
Description
Model
Lists the model number of the
machine
SN
Lists the serial number of the
machine
S/W Rev
Lists the software revision of
the master controller
Protected Menus
There are 5 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter:
auto idle, maximum mowing ground speed, maximum
transport ground speed, Smart Power, cutting unit
counterbalance, and Turnaround. These settings are
in the Protected Menu.
Accessing the Protected Menu Settings
1.
From the Main Menu, scroll down to the Settings
Menu and press the right button.
2.
In the Settings Menu, scroll down to the
Protected Menu and press the right button.
3.
To enter the PIN code, use the center button to
set the first digit then press the right button to
move on to the next digit.
4.
Use the center button to set the second digit
then press the right button to move on to the
next digit.
5.
Use the center button to set the third digit then
press the right button to move on to the next
digit.
6.
Use the center button to set the fourth digit then
press the right button.
7.
Press the middle button to enter the code.
You can change the ability to view and change the
settings in the Protected Menu. Go to the Protected
Menu and scroll down to Protect Settings. Using the
right button, changing Protect Settings to the O
FF
position allows you to view and change the settings
in the Protected Menu without entering the PIN code.
Changing Protect Settings to the O
N
position hides the
protected options and requires entering a PIN code to
change the setting in the Protected Menu. After you
have set the PIN code, you must turn the key to the
O
FF
position and then to the O
N
position to enable
and save this feature.
Viewing and Changing the Protected Menu Settings
1.
In the Protected Menu, scroll down to Protect
Settings.
2.
To view and change the settings without entering
a PIN code, use the right button to change the
Protect Settings to O
FF
.
3.
To view and change the settings with a PIN
code, use the left button to select O
N
, set the
PIN code, and turn the key to the O
FF
position
and then to the O
N
position.
Setting the Auto Idle
1.
In the Settings Menu, scroll down to Auto Idle.
2.
Press the right button to change the auto idle
time between Off, 8S, 10S, 15S, 20S, and 30S.
20
