Toro 30873, Operator'S Manual

Page: 14 / 72

5
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Lower the cutting units.
3. Engage the parking brake.
4. Shut off the engine and remove the key.
5. Check the tire pressure before use; refer to
Checking the Tire Pressure (page 26) .
Important:
Maintain pressure in all tires
to ensure a good quality-of-cut and proper
machine performance.
Do not underinflate
the tires.
6. Check the rear-axle lubricant level before
you start the engine for the first time; refer to
Checking the Rear-Axle Lubricant (page 55) .
7. Check the engine-oil level before starting the
engine; refer to
Checking the Engine-Oil Level
(page 45) .
8. Check the hydraulic-fluid level before starting
the engine; refer to
Checking the Hydraulic-Fluid
Level (page 60) .
9. Check the cooling system before starting the
engine; refer to
Checking the Cooling System
(page 57) .
10. Grease the machine before use; refer to
Greasing the Bearings and Bushings (page 43) .
Failure to properly grease the machine will result
in premature failure of critical parts.
14