Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
Warning decal
1
Replace the warning decal (CE
machines only).
Hood-latch bracket
1
Rivet
2
Washer
1
Screw (1/4 x 2 inches)
1
2
Locknut (1/4 inch)
1
Install the hood latch.
3
No parts required
–
Adjust the roller scraper (optional).
4
No parts required
–
Install the mulching baffle (optional).
5
No parts required
–
Prepare the machine.
Media and Additional Parts
Description
Qty.
Use
Operator's Manual
1
Review before operating the machine.
Engine owner’s manual
1
Refer to the manual for additional maintenance information.
Operator Training Material
1
Review before operating the machine.
Declaration of Conformity
1
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Replacing the Warning
Decal (CE Machines Only)
Parts needed for this procedure:
1
Warning decal
Procedure
On machines requiring European CE compliance,
replace warning decal Part No. 112-5297 with warning
decal Part No. 127-6447 (for 4500 series machines) or
decal Part No. 127-6448 (for 4700 series machines).
11
