InfoCenter Icon Description (cont'd.)
Symbols are often
combined to form
sentences. Some
examples are shown
below
Operator should put machine in
neutral
Engine start is denied
Engine shutdown
Engine coolant is too hot
Hydraulic fluid is too hot
Sit down or engage parking brake
Accessible only by entering PIN
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for an overview of the options available from
the menus:
Main Menu
Menu Item
Description
Faults
Contains a list of the recent
machine faults; refer to the
Service Manual
for more
information.
Service
Contains information on the
machine such as hours of use
and other similar numbers
Diagnostics
Lists various states that the
machine currently has; you
can use this to troubleshoot
certain issues as it quickly tells
you which machine controls
are on and which are off.
Settings
Allows you to customize and
modify configuration variables
on the InfoCenter display
About
Lists the model number, serial
number, and software version
of your machine
Service
Menu Item
Description
Hours
Lists the total number of hours
that the machine, engine, and
fan have been on, as well
as the number of hours the
machine has been transported
and overheated
Counts
Lists the number of starts,
cutting unit/PTO cycles, and
fan reversals the machine has
experienced
Diagnostics
Menu Item
Description
Left Cutting Unit
Center Cutting Unit
Right Cutting Unit
Traction
HI/LO Range
PTO
Engine
Cruise
Refer to the
Service Manual
or your authorized Toro
distributor for more information
on the Engine Run menu and
the information contained
there.
19
