Toro 30799, Operator'S Manual, Page: 7 / 24

7
Setup
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Note: Use this chart as a checklist to ensure that all parts necessary for assembly have been received. Without these parts,
total setup cannot be completed. Some parts may have already been assembled at the factory.
Description Qty. Use
Hose clamp
Hose bracket
Capscrew, 1/4 x 1 in.
Nut
1
2
2
2
Install hose clamp
Push arm adapter
Push arm plate
Capscrew, 3/8 x 2-3/4 in.
Flat washer
Nut
1
1
4
4
4
Install right push arm adapter
Front lift arm
Locknut
Capscrew, 3/8 x 3 in.
1
2
2
Rear lift bracket
Square U-bolt
U-bolt
Height-of-cut chain
Clevis pin
Hairpin
Nut
1
1
1
1
1
1
6
Install rear lift support
Capscrew, 3/8 x 7/8 in. 4 Secure covers for CE
Roll pin 1 Install drive shaft
Danger decal 1 Place over 54-9220 on deflector for CE.
Parts catalog 1
Operator’s manual 1 Read before operating the machine.
Registration card 1 Fill out and return to Toro.