g012543
Figure 15
1.
Left shelf
11.
Align the right shelf with the right end of the rear
shelf and the edge of the deck (
and
). Using the left shelf as a template,
locate, mark, and drill three 9/32 inch diameter
holes in the deck.
g012544
Figure 16
1.
Right shelf
12.
Secure the right shelf to the deck with 1 bolt
(1/4-20 x 1 inch), 2 bolts (1/4-20 x 3/4 inch), and
3 locknuts. Position the bolt heads to the inside
of the deck.
7
Mounting the New Deflector
Stop
Parts needed for this procedure:
1
Deflector stop
2
Capscrew, 1/4 x 3/4 inch
2
Locknut, 1/4 inch
Procedure
1.
Using the new deflector stop as a template, set
it on the original flat deflector stop (
).
Ensure that the new deflector stop is flush at
the bottom, contacting the side of the deck, and
parallel with the outside edge of the deflector
support.
g012545
Figure 17
1.
New deflector stop
3.
Bolts and locknuts
2.
Mark and drill holes
2.
Locate, mark and drill two 9/32 inch diameter
holes through the old deflector support.
3.
Mount the new deflector support to the old
deflector stop with 2 bolts (1/4-20 x 3/4 inch) and
locknuts (1/4-20 inch), as shown in
9
