Seat switch icon:
shows an arrow out when the
operator seat is empty; the switch shows a figure icon
when you are in the operator seat.
•
Shows the seat with an error when the operator
seat is unoccupied
•
Shows the seat with a figurine when the operator
seat is occupied
Exit side lockout icon:
changes from black to green
when in operation.
Pedestrian gate icon:
•
Shown in the
UP
position with a figurine: the gate
is not in the correct position for drilling
•
Shown in the
DOWN
position: the gate is correctly
positioned for drilling
Cam override input icon:
turns green when the
override button is pushed on the joystick.
Mud pump status icon:
•
Black: mud pump is off
•
Yellow: mud pump is in standby
•
Green: mud pump is in on
•
Green with 100: mud pump is in max flow
Mud pump flow icon:
indicates the input from the
rocker switch on the joystick.
•
When the rocker switch is actuated up, the
indicator turns green with a blue up/increase arrow.
•
When the rocker switch is actuated down, the
indicator turns green with a blue down/decrease
arrow.
•
The icon is black when the rocker switch is not
pressed.
Processor indicator icon:
shows a red X to indicate
a problem with the expansion processor located next
to the main controller.
Travel Pendant I/O Screen
To access this screen push button 7 on the I/O screen.
The travel pendant screen shows the voltage and
position of the joystick located on the pendant.
g213169
Figure 60
The red dot appears in the center of the target and
the FNR (forward, neutral, reverse) and Steer voltage
shows 2.5 V prior to allowing the drill to move. If the
red dot travels outside of the outermost black ring,
service or replace the pendant with a new pendant.
The indicators to the right and left of the circle show
the direction of the track travel. The voltages show
a range from 0 to 10.0 V.
Errors and Machine
Information Screens
Drill Errors Screens
To access this screen push button 1 on the Errors and
Machine Information screen.
This screen displays any drill errors.
Use the up and down arrows to scroll through the
errors. Contact your Authorized Service Dealer for
codes that cannot be cleared.
g213168
Figure 61
14
