Toro 23823/A, Software Manual

Page: 6 / 16

Pushing Pipe in SmartTouch Mode
Start the SmartTouch mode with the cam assembly in
the home position (row 4 of the pipe box).
Important:
Ensure that you hold the lower section
of the cam rocker switch, on the left joystick,
completely down until the action is complete in
each step (
Figure 23 ).
g210060
Figure 23
Hold the upper section of the cam rocker switch,
on the left joystick, completely down until all
actions are complete to go to the previous step in
the sequence (
Figure 24 ).
g210061
Figure 24
1. Push button 1 to select push pipe ( Figure 25 ).
2. Push buttons 2 and 3 to select the row where
you want to get the pipe (
Figure 25 ).
g232387
Figure 25
1. Push pipe 2. Select pipe row
3. Hold the lower section of the rocker switch
(
Figure 27 ) until the cam assembly rotates to the
selected row and the elevator lowers the pipe
into the opening (
Figure 28 ).
g231717
Figure 26
g210462
Figure 27
g232382
Figure 28
6