Toro 2226, Operator'S Manual

Page: 96 / 108

g220260
Figure 119
D. Remove the cap from the antifreeze tank for
the drilling-fluid pump (
Figure 120 ).
g220258
Figure 120
1. Antifreeze tank 3. Antifreeze valve (shown in
the
ON
position)
2. Drilling-fluid valve (shown
in the
ON
position)
E. Ensure that the tank is full of antifreeze
(
Figure 120 ).
3. Circulate the antifreeze as follows:
A. Open the antifreeze valve on the front side
of the drilling-fluid pump as shown in
Figure
120 .
B. Start the machine and turn On the
drilling-fluid pump.
C. Add antifreeze to the tank as needed
(
Figure 120 ).
D. When the antifreeze comes out of the drill
spindle (
Figure 118 ), turn the pump off.
4. Turn the machine off.
5. Install the cap onto the antifreeze tank ( Figure
120 ).
6. Close the antifreeze valve ( Figure 120 ).
96