Left Joystick
g226145
Figure 31
Left Joystick in
DRILL
mode
1.
Raise the elevator
6.
Go to the next step in SmartTouch™ mode
2.
Lower the elevator
7.
Retract the pipe gripper arm
3.
Open / Close the pipe gripper
8.
Extend the pipe gripper arm
4.
Rotate the cam assembly
9.
Apply tread-joint compound
5.
Go to the previous step in SmartTouch™ mode
g226143
Figure 32
Left Joystick — Directional Controls
1.
Rotate the drill spindle counter clockwise (Drill Mode II)
3.
Rotate the drill spindle clockwise (Drill Mode II)
2.
No action
4.
No action
Push the joystick left and hold the cam rocker switch at the same time to use the cam override function.
Important:
This overrides the anti-crash prevention warning and could cause damage to the machine.
Push the cam rocker switch forward to rotate the cam assembly out.
Push the cam rocker switch backward to rotate the cam assembly in.
31
Summary of Contents for 2226
Page 107: ...Notes ...
Page 108: ......
