Toro 137-1019, Installation Instructions Manual

Page: 19 / 24

4. Connect the 122 cm (48 inches) clear tube to
the 33 cm (13 inches) clear tube and 43 cm (17
inches) clear tube using the tee fitting (
Figure
58 ).
g245855
Figure 58
1. Passenger’s side clear
tube—122 cm (48 inches) 4. Driver’s side clear
tube—43 cm (17 inches)
2. Tee fitting 5. Water gutter
3. Floor clear tube—33 cm
(13 inches)
5. Starting from the passenger’s side, route the
connected clear tube down through the floor
board (with the clutch pedal) to the driver’s side
of the machine (
Figure 59 ).
6. Secure the connected clear tube with the 3
magnetic tie-wrap mounts and 3 cable ties
(
Figure 59 ).
g245856
Figure 59
1. Routed connected tubes 2. Cable ties and magnetic
tie-wrap mounts
7. Pinch each end of the clear tube and cut it at a
45° angle (
Figure 60 ).
8. Align the clear tube with the bottom of the water
gutter so that the top of the angle is to the
outside of the machine and install it (
Figure 60 ).
19