g246160
Figure 60
1.
Tube cut at a 45° angle and installed at the bottom edge of
the water gutter
16
Installing the Floor and
Side-Plate Panels
Parts needed for this procedure:
2
Floor-plate panel
2
Side-plate panel
1
Side-plate panel seal
12
Bolt (1/4 inch)
Procedure
1.
Install the floor-plate panels on each side of
the machine using 3 bolts (1/4 inch) as shown
in
g026248
Figure 61
1.
Bolt (1/4 inch)
2.
Floor-plate panel
2.
Torque the bolts to 1017 to 1243 N∙cm (90 to
110 in-lb).
3.
Install the side-plate-panel seal onto the
side-plate panels (
).
20
