g253015
Figure 62
4.
Install the side-plate panels on each side of the
machine using 2 bolts (1/4 inch) as shown in
g026249
Figure 63
5.
Torque the bolts to 1017 to 1243 N∙cm (90 to
110 in-lb).
17
Installing the Center
Console Panel, Seats,
Coolant Tank, CVT-Cooling
Duct (HDX-Auto Machines
only), and
Operator’s
Manual
Tube
Parts needed for this procedure:
2
Bolt (1/4 inch)
2
Spacer
1
Strap
2
Nut (1/4 inch)
1
CVT intake hood assembly (sold separately)
Procedure
1.
Install the
Operator’s Manual
tube (
).
g026275
Figure 64
1.
CVT intake hood assembly
(Workman HDX-Auto
machines only—kit sold
separately)
4.
R-clamp
2.
Nut
5.
Plate
3.
Spacer
6.
Bolt
2.
Align the holes in the seat rails with the holes
in the shroud for the seat mounting positions
(
).
21
