Toro 137-1019, Installation Instructions Manual, Page: 8 / 24

g253025
Figure 23
4. Drill the holes into the roof using a 5/16 inch drill
bit (
Figure 24 ).
g253012
Figure 24
5. Install the roof using 2 bolts (1/4-2- x 1 inch) and
2 washers (
Figure 25 ).
g253017
Figure 25
7
Removing the Center
Console Panel and Seats
No Parts Required
Removing the Center Console
Panel
For Workman HDX Machines
1. Unscrew and remove all the knobs from the
console levers and from the gear-shift lever
(
Figure 26 ).
g023161
Figure 26
1. Shifter rod 4. Control rod
2. Jam nut 5. Control knob
3. Shifter handle
2. Remove the jam nut from the gear-shift lever
(
Figure 26 ).
3. Remove the 6 screws securing the outside edge
of the cover plate of the center console to the
chassis and remove the cover plate (
Figure 27 ).
8