2.
Install the adjuster plate and back plate to the
dash-support tube using the 4 carriage bolts
(1/4 x 1-3/4 inches) and flange nuts (1/4 inch)
as shown in
.
g245999
Figure 52
1.
Carriage bolt (1/4 x 1-3/4
inches)
3.
Flange nut (1/4 inch)
2.
Adjuster plate
4.
Back plate
3.
Install the tap bolt (1/2 x 4 inches), flange nut
(1/2 inch), and stop plate to the adjuster plate
(
).
g246000
Figure 53
1.
Stop plate
3.
Adjuster plate
2.
Flange nut (1/2 inch)
4.
Tap bolt (1/2 x 4 inches)
4.
Close the gap between the dash and cab by
adjusting the tap bolt (1/2 x 4 inches) until the
stop plate pushes upward on the dash (
g246149
Figure 54
1.
Gap between the dash and cab
17
