Toro 137-1019, Installation Instructions Manual

Page: 9 / 24

g023165
Figure 27
1. Screw 2. Cover plate
Removing the Center Console
Panel
For Workman HDX-Auto Machines
1. Remove all the knobs from the console levers
and from the transmission lever by rotating the
knobs counterclockwise (
Figure 28 ).
g024571
Figure 28
1. Brake lever 5. Transmission lever (L
position) knob
2. Hydraulic-lift lever knob 6. Hydraulic-lift lock (locked
position—left)
3. Speed-range lever knob 7. Speed-range lever (A
position)
4. Transmission lever knob
2. Remove the 4 hex-head screws securing the
shift-indicator cover to the seat shroud (
Figure
29 ).
g024588
Figure 29
1. Indicator connector 4. Control cover
2. Shift-indicator cover 5. Machine harness
connector
3. Hex-head screws
3. Lift the shift indicator up, disconnect the
indicator connector from the machine harness
connector, and remove the indicator cover from
the machine (
Figure 29 ).
4. Remove the 6 hex-head screws securing the
control cover to the seat shroud, and remove the
control cover (
Figure 29 ).
Removing the Seats
Remove the 8 socket-head bolts securing the seat
rails of the seat to the chassis, and remove the seats
(
Figure 30 ).
g023164
Figure 30
1. Socket-head bolts 3. Seat
2. Seat rail
9