Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Outboard-lift bracket (short flanges)
1
Inboard-lift bracket (long flanges)
1
Hex-head bolt (5/16 x 5-1/2 inches)
1
2
Flange nut (5/16 inch)
1
Install the bed bracket.
Switch
1
3
Fuse (15 A)—machine serial number
411599999 and before only
1
Install the switch.
Lift actuator
1
Clevis pin (3-1/2 inches)
1
Clevis pin (2-1/4 inches)
1
Hairpin
2
Hex-head bolt (1/2 x 5-1/2 inches)
1
4
Locknut (1/2 inch)
1
Install the lift actuator.
5
No parts required
–
Remove the prop rod.
Note:
Determine the left and right sides of the machine from the normal operating position.
2
