Operation
WARNING
Driving the machine with the cargo bed raised
could cause the machine to tip or roll easier.
You could damage the structure of the cargo
bed if you operate the machine with the bed
raised.
•
Operate the machine when the cargo bed
is down.
•
After emptying the cargo bed, lower it.
WARNING
The weight of the bed may be heavy. Hands
or other body parts could be crushed.
Keep your hands and other body parts clear
when lowering the bed.
Important:
When you hear a ratcheting sound,
the bed lift is completely extended or retracted.
Do not continue pressing the switch.
Raising the Bed
1.
Turn the key switch to the O
N
position.
2.
Push the top of the switch to raise the bed.
Lowering the Bed
Push the bottom of the switch to lower the bed.
Note:
The actuator may cause slight deformation to
the bed after it is fully lowered and before the actuator
clutch engages. Release the switch when you hear
a ratcheting noise.
Maintenance
Servicing the Air Cleaner
For Workman MDX-D Machines
1.
Support the bed with lifting equipment.
2.
Remove the hairpin cotter and clevis pin
securing the actuator rod to the inboard and
outboard-lift brackets (
).
3.
Tip the bed all the way up.
4.
Rotate the actuator forward.
5.
Remove the air cleaner and service it as
required; refer to the machine
Operator’s
Manual
.
6.
Install the air cleaner; refer to the machine
Operator’s Manual
.
7.
Lower the bed and align the lift actuator to the
lift brackets (
).
8.
Secure the lift actuator to the lift brackets with
the clevis pin and hairpin (
).
9
