1N15-002
Pirate Blasta Installation Manual V1 03/03
Set Up
Prime the Pump:
1. The pump will need to be filled with water and primed before operation.
Proceed as follows. Open the pump house door and referring to Dia 2 locate
and remove the filling plug. Using a suitable container completely fill the pump
chamber with clean water and replace the plug.
Dia 2 – The pump filling plug
2. Locate the Aqua-Blasta control electronics in the pump house lid. (Dia 3)
Dia 3 – The control electronics
©Tornado International Ltd. 2003
-7-
Confidential
