background image

1N15-002

 

Pirate Blasta Installation Manual V1 03/03

Testing

1. Insert coins to the value of the vend price, (or your token if the game has

been supplied for token operation) into each playing position in turn. 

2. Check that the gun starts to operate as the vend price is reached and that the

gun runs for the set play time. 

3. Aim at each of the targets in turn to check for correct operation.

Tip!

None of the guns will fire at all of the targets. This is a design feature to
encourage additional plays using a different gun.

4. After all of the guns and targets have been tested leave the game idle for the

attract mode delay time, to check that the attract mode is working. A short
pulse of water should issue from guns number 1 to 4 in turn, then from guns
1&4 together, then guns 2&3 together and finally all four guns together.

The unit is now tested and ready to use. 

Please refer to the User Manual to change any of the settings or to apply the
protection code. Full details of the game and cash reporting features of Pirate
Blasta can also be found in the manual.

Please keep this Installation Manual in a safe place in case you need to move
the game at some time in the future.

Thank you for purchasing a Tornado International  product, we are confident that
it   will   give   you   many   years   of   trouble   free   and   profitable   operation.   Contact
information   can   be   found   on   page   2   of   this   manual   if   you   should   need   any
information or assistance in the operation of this product.

©Tornado International Ltd. 2003

-10-

Confidential

Summary of Contents for Fire Blasta












Reviews: