1N15-002
Pirate Blasta Installation Manual V1 03/03
Before Installation
Caution!
Check that the supply voltage matches the voltage stated on the front of the PSU
located in the pump house lid. (Dia 1)
Dia 1 – The PSU
Tools & Items Required:
(These are not supplied with the unit)
Small flat screwdriver
Medium flat screwdriver
Medium cross point screwdriver
Power drill
3.4mm drill bit
Sharp knife
Sealant dispensing gun
Sufficient 15mm copper pipe and fittings (or flexible hose and fittings) to reach
from the water supply to the left hand rear of the unit.
Additional power supply cable (3 core x 1.25sqmm) if the power supply is over
2M from the left or right rear corner of the unit.
10off each of the coins or token to be used
©Tornado International Ltd. 2003
-5-
Confidential
