15
On the instrument board the
signal lamp (15) comes on
which signals that the parking
brake is inserted.
To release the parking brake it
is sufficient to press the brake
pedal (1) and automatically it
is released.
AUTOMATIC SQUEEGEE
LIFTING GOING
BACKWARDS
Selecting the backwards
movement the squeegee is
brought automatically to the
upper position. It will then
lower again in the following
forward movement.
This happens both in
automatic and manual mode
in order to protect the integrity
of the squeegee.
When the signal lamp (7) is on,
then the machine is functioning in
automatic (AUTO) mode.
3.Check that the knob of the
solution valve (27) is in the
position of optimum flow,
depending on the type of floor
and the type of dirt (see under the
paragraph “FLOW ADJUSTMENT
OF THE DETERGENT
SOLUTION”).
4.Position the selector (28)
forward to choose the forward
drive.
5.Adjust the movement speed in
forward with the push button (21)
(see under paragraph "FORWARD
AND BACKWARD MOVEMENT").
6.Pressing the accelerator pedal,
the machine begins to proceed
and in automatic mode all the
working functions are activated.
In fact, automatically both the
brushes base and the squeegee
go down, the brushes begin to
turn, the solenoid valve opens to
permit the detergent solution to
flow down onto the brushes and
the suction system is activated to
recover the dirty water from the
floor.
Positioning backwards the
selector (28) to choose the
rear drive and pressing the
accelerator pedal the rear
drive starts, the squeegee lifts
automatically and will then return
to lower itself during the next
forward movement.
If the accelerator pedal is
released for more than 3
seconds, automatically all the
functions are being switched off
and both the brushes base and
the squeegee are being lifted.
Pressing the pedal again, the
machine starts to move again and
in automatic mode all the working
functions are reactivated.
WORKING IN AUTOMATIC
MODE
The automatic operation
is useful to simplify the
operator’s work.
1.Activate the machine (see
under paragraph “STARTING
OF THE MACHINE”).
2.Pressing the push button
(6) the automatic (AUTO)
functioning is chosen.
WORKING IN MANUAL MODE
The manual mode is useful when
the operator wants to carry
out separately the washing and
drying of the floor.
ATTENTION:
Washing and drying functions
that are not carried out
simultaneously represent an
improper use of the machine
(see under paragraph “GENERAL
RULES OF SECURITY”). If they
are carried out separately,
forbid the working areas to the
passage of nonauthorized
personnel. Signal the areas of
moist floors with suitable signs.
1.Activate the machine (see
under paragraph “STARTING
OF THE MACHINE”).
2.Pressing the push button
(3) the functioning of manual
(MAN) mode is chosen. When
the signal lamp (2) is on, then
the machine is functioning in
manual (MAN) mode.
TO CARRY OUT THE
WASHING WITH ONLY THE
BRUSHES:
1.Check that the knob of the
solution valve (27) is in the
position of optimum flow,
depending on the type of
floor and the type of dirt (see
under the paragraph “FLOW
ADJUSTMENT OF THE
DETERGENT SOLUTION”).
