22
INTERVENTION
DAILY 20 HOURS * 200 HOURS * 1000 HOURS *
RECOVERY TANK CLEANING
•
SUCTION FILTER CLEANING
•
SOLUTION TANK FILTER CLEANING
•
BRUSH CLEANING
•
BRUSH DISASSEMBLY AND CLEANING
•
SQUEEGEE CLEANING
•
FRONT SQUEEGEE RUBBER REPLACEMENT
•
REAR SQUEEGEE RUBBER REPLACEMENT
•
SIDE RUBBER REPLACEMENT
•
CHECK SQUEEGEE ADJUSTMENT
•
SQUEEGEE HOSE CLEANING
•
SOLUTION TANK CLEANING
•
CHECK BATTERIES ELECTROLYTE
•
CHECK BRAKE
•
TRACTION MOTOR CHECK
•
BRUSH MOTOR CHECK
•
VACUUM MOTOR CHECK
•
CHECK BRUSH BASE GROUP
•
SCREW TIGHTENING
•
PROGRAMMED MAINTENANCE
* The hours refer to the ones indicated on the display (see under paragraph ”HOUR METER”).
EXCESSIVE FOAM
PRODUCTION
Check that low foam
detergent has been used.
Eventually add small
quantities of anti foam liquid
into the recovery tank.
Please be aware that a bigger
quantity of foam is produced
when the floor is not very
dirty. In this case please dilute
detergent solution.
2.Check that the squeegee
rubbers are clean (see un-
der paragraph “SQUEEGEE
CLEANING”).
3.Check the adjustment of the
height and the inclination of
the squeegee (see under para-
graph “ADJUSTMENT OF THE
SQUEEGEE”).
4.Check that the suction and
the squeegee hoses are cor-
rectly inserted in their proper
seats on the recovery tank.
5.Clean the suction filter (see
under paragraph “SUCTION
FILTER CLEANING”).
6.Clean the squeegee
hose (see under paragraph
“SQUEEGEE HOSE
CLEANING”).
7.Replace the rubbers if worn
out.
